Shopping cart

Filters

Personal menu

Preferences

Picture of Sidewall Propeller Exhaust Fan, Model SBE-2L36, Belt Drive, 2HP, 208-230/460V, 3Ph, Motor & Drives Unassembled, 13635-19040 CFM

Manufacturer: Greenheck

Sidewall Propeller Exhaust Fan, Model SBE-2L36, Belt Drive, 2HP, 208-230/460V, 3Ph, Motor & Drives Unassembled, 13635-19040 CFM

$3,127.00

Model SBE, belt drive, sidewall propeller exhaust fans are designed for commercial and industrial applications where high volumes of air and low static pressures are required.

42 x 42 inch fan panel with prepunched mounting holes for easy installation and precise alignment
36 inch, 5-blade galvanized steel propeller
Adjustable motor pulley to optimize fan performance

SKU: SBE-2L36-20X-3-QD-DR2

Ships From: Greenheck

Qty:

View Related Products

Available In: 5-7 Business Days

Product Specifications
Performance
Dimensional Drawing
Literature
Certifications

Motor HP	Max BHP	Max Fan RPM	Min Fan RPM	Ps (in. wg)	0	0.125	0.25	0.375
2	2.07	660	530	CFM	19040	17691	15971	13635
Sones	24	24	23	23
Bhp	2.03	2.05	2.07	2.04

Dimension
A	44 in
B	21.5 in
C	16.5 in
D	2 in
E	36.625 in

Dimensions
Base/Panel Length X Width Square base dimension on power roof ventilators. Square fan panel dimension on sidewall propeller fans.	44 x 44 in
Impeller Diameter Dimension of the impeller (propeller or wheel) in inches.	36 in
Damper Width x Damper Height The "ACTUAL" damper width and height. Dampers are undersized to allow them to be mounted into the duct work/wall opening.	38 x 38 in
Inlet Diameter The diameter of the opening of a fan where air is drawn in.	36 5/8 in
Bearing Size Bore size on the bearings utilized on a ventilator.	1 in
Width Describes the width of a given product.	44 in
Height The height of a given product.	44 in
Weight Weight	133 lbs

Performance
CFM Range CFM Range	13635-19040
FRPM Range FRPM Range	530-660

Application
Application Applications/uses for a particular fan or ventilator.	Exhaust General and Clean Air
Mounting Location Refers to the location where a fan or ventilator can be mounted.	Wall
Mounting Position Refers to the orientation in which a product can be mounted.	Vertical

Construction Features
Drive Type Transmission type of the ventilator (belt drive or direct drive).	Belt Drive
Impeller Type Style of impeller that is utilized on a product (i.e. Centrifugal or Axial).	Propeller
Impeller Material Type of material the impeller of a fan or ventilator is constructed of.	Galvanized Steel
Housing Material Type of material the housing of a ventilator is constructed of.	Galvanized Steel
Includes Describes items that a particular product includes such as mounting hardware, etc.	Unassembled drive package
Max Inlet Temp The maximum entering air temperature that a fan or ventilator can withstand while in operation, without compromising the life of the unit.	130 °F
Certifications Certifications	AMCA Sound & Air UL/cUL 705 AMCA Sound & Air UL/cUL 705
Drive Package Description Describes whether the drive package on a particular ventilator is assembled, shipped loose, or must be provided by the customer.	Motor and drives shipped loose

Motor Information
Service Factor A safety factor to be used when the load temporarily exceeds the nominal horse power rating of a given motor. When used on a motor nameplate, a number which indicates how much above the nameplate rating a motor can be loaded without causing serious degrad	1.15
Phase Indicates the space relationships of windings and changing values of the recurring cycles of AC voltages and currents. The most common power supplies are either single- or three-phase.	3
Voltage The force that causes a current to flow in an electrical circuit. The voltage of a motor is usually determined by the supply to which it is attached. NEMA requires that motor be able to carry its rated horsepower at nameplate voltage plus or minus 1% al	208-230/460
HP The power required to drive an air moving device. Horsepower required varies with system conditions.	2
Hertz Measure of the frequency or cycles per second.	60
Motor Enclosure The housing or frame of the motor.	Open Drip Proof
RPM The number of times per minute the shaft of the motor (machine) rotates. This is a function of design and the power supply.	1800
Motor Insulation The class of motor insulation for a given motor. The temperature capabilities of each insulation class is defined as being the maximum temperature at which the insulation can be operated to yield an average life of 2, hours (A = 15?C, B = 135?C, F =	F
Nominal Efficiency Nominal Efficiency	86.5

General
Unit of Measure Unit of Measure	ea
Warranty Length Warranty Length	1 Year

Model SBE, belt drive, sidewall propeller exhaust fans are designed for commercial and industrial applications where high volumes of air and low static pressures are required. Typical installations include manufacturing facilities, warehouses, greenhouses, and agricultural buildings.

Galvanized steel drive frame with one-piece drawn venturi for structural rigidity
Cast iron pillow blocks with grease fittings
Motor, pulleys and belt ship separately for field assembly
Permanent embossed aluminum nameplate for exact model and serial number identification

Products specifications

Unit of Measure	ea
Service Factor	1.15
Application	Exhaust General and Clean Air
Mounting Location	Wall
Base/Panel Length X Width	44 x 44 in
Drive Type	Belt Drive
Phase	3
Voltage	208-230/460
HP	2
Mounting Position	Vertical
Impeller Type	Propeller
Impeller Material	Galvanized Steel
Housing Material	Galvanized Steel
Includes	Unassembled drive package
Max Inlet Temp
Certifications	AMCA Sound & Air, UL/cUL 705
Warranty Length	1 Year
Drive Package Description	Motor and drives shipped loose
Impeller Diameter
Damper Width x Damper Height	38 x 38 in
Inlet Diameter
Bearing Size
Width
Height
Weight
Hertz
Motor Enclosure	Open Drip Proof
RPM
Motor Insulation	F
Nominal Efficiency
CFM Range	13635-19040
FRPM Range	530-660

Motor HP	Horsepower. Used to indicate a fan's motor size.
Max BHP	Brake Horsepower. A measure of power consumption. Used to determine the proper motor horsepower and wiring.
Max Fan RPM	Revolutions Per Minute. Measure of maximum fan speed.
Min Fan RPM	Revolutions Per Minute. Measure of minimum fan speed.
Ps	Static Pressure. Resistance to airflow measured in inches of water gauge.
CFM	Cubic Feet Per Minute. A measure of airflow.
Sones	A measure of loudness. One sone can be approximated as the loudness of a quiet refrigerator at a distance of 5 feet. Sones follow a linear scale, that is, 10 sones are twice as loud as 5 sones.

Sidewall Propeller Exhaust Fan, Model SBE-2L36, Belt Drive, 2HP, 208-230/460V, 3Ph, Motor & Drives Unassembled, 13635-19040 CFM

Disconnect Switch, NEMA-3R Weatherproof, 3 Pole, Single Throw, Up to 7.5HP, 230/460V, 3 Phase

Weatherhood Kit, For 36 In Sidewall Prop Fan, 45º turn down

Weatherhood Kit, For 36 In Sidewall Prop Fan, 90º turn down

Disconnect Switch, NEMA-1, 3 Pole, Single Throw, Up to 7.5HP, 230/460V, 3 Phase

Backdraft damper, vertical mount, Model WD-320, 38 In Sq, Flange on Discharge

Wall Housing, For 36 In Sidewall Prop Fan