Remote balancing dampers are ideal for applications where access is difficult for manually adjusting airflow balance. The “EZ Balance” remote control operates the damper motor by connecting an RJ11 connector mounted on the wall, ceiling, or diffuser.

• Cables, wall plates and connectors available as accessories
• Factory-mounted actuator
• Tested in accordance with AMCA Standard 500-D

Rack and Pinion Controller with Angle Bracket (often mounted inside plenums of a slot diffuser) Type B includes Hardware for Other's Dampers 1/2" round or 3/8" square rod

The Young 301 concealed locking regulator is designed to control dampers from the ceiling line. The 301 may be used with either our 820A-C rectangular or our 5020- B round bottom duct mounted damper. It may also be used in combination with our 927 and 1200 right angle controls on any round or rectangular side control damper, including Young 5020 and 820 Series.

Concealed wall regulator in a 4x4 box with a SS cover plate and exposed wall control. Type B includes Hardware for Other's Dampers 1/2" round or 3/8" square rod

896 Concealed Air Split Regulators 896 concealed air split regulators contain all the hardware necessary to operate other manufacturers’ splitter dampers in a vertical position from the ceiling line. Hinge and blade must be supplied by others. 896 has an inconspicuous 7/8” cover plate which is zinc plated for easy painting. The plate has a spring clip which presses into the pipe (see illustration) and allows a 1” adjustment, as well as a 1/8” flange which conceals the joint between the pipe and plaster or acoustical material. Unless otherwise specified, 896 comes with a 6” connecting rod and a 12” length of 3/8” pipe which may be cut off to the desired length in the field. Extra connecting rod and pipe are available by the foot. 896 regulators are all operated by our 030 socket wrench.

3/8"SQ X 3/8"SQ ROD COUPLING

The RBDR-50 is a round remote balancing damper regulating the flow of air in an HVAC system. EZ Balance remote: handheld remote (equipped with 9-volt power supply) operates the damper actuator

Remote balancing dampers are ideal for applications where access is difficult for manually adjusting airflow balance. The “EZ Balance” remote control operates the damper motor by connecting an RJ11 connector mounted on the wall, ceiling, or diffuser.

• Cables, wall plates and connectors available as accessories
• Factory-mounted actuator
• Tested in accordance with AMCA Standard 500-D

Remote balancing dampers are ideal for applications where access is difficult for manually adjusting airflow balance. The “EZ Balance” remote control operates the damper motor by connecting an RJ11 connector mounted on the wall, ceiling, or diffuser.

• Cables, wall plates and connectors available as accessories
• Factory-mounted actuator
• Tested in accordance with AMCA Standard 500-D

RIGHT ANGLE MITER GEAR

Remote balancing dampers are ideal for applications where access is difficult for manually adjusting airflow balance. The “EZ Balance” remote control operates the damper motor by connecting an RJ11 connector mounted on the wall, ceiling, or diffuser.

• Cables, wall plates and connectors available as accessories
• Factory-mounted actuator
• Tested in accordance with AMCA Standard 500-D

Damper Mounted Regulator for 3/8" Square Shaft. Lever on 1" standoff

Oversized Cover Zinc 3.75"

The Young Regulator 5020-1200 commercial quality, balancing damper provides efficient airflow control in conventional air handling systems. It consists of a round damper with a locking worm gear regulator. The damper is constructed of galvanized steel with a 20 ga. blade, synthetic bushings, and a 1/2″round plated steel shaft. The Young 1200 self-locking right angle worm gear regulator installed at the factory, is used when an operating shaft must be carried down at a right angle to the damper shaft. It may be used together with a variety of Young regulators, including 301, 315, 896C and flex shaft to operate dampers from the ceiling line. The 1200 is made of heavy-duty steel and die cast construction.

The Young Regulator 5020-1200 commercial quality, balancing damper provides efficient airflow control in conventional air handling systems. It consists of a round damper with a locking worm gear regulator. The damper is constructed of galvanized steel with a 20 ga. blade, synthetic bushings, and a 1/2″round plated steel shaft. The Young 1200 self-locking right angle worm gear regulator installed at the factory, is used when an operating shaft must be carried down at a right angle to the damper shaft. It may be used together with a variety of Young regulators, including 301, 315, 896C and flex shaft to operate dampers from the ceiling line. The 1200 is made of heavy-duty steel and die cast construction.

The Young Regulator 5020-1200 commercial quality, balancing damper provides efficient airflow control in conventional air handling systems. It consists of a round damper with a locking worm gear regulator. The damper is constructed of galvanized steel with a 20 ga. blade, synthetic bushings, and a 1/2″round plated steel shaft. The Young 1200 self-locking right angle worm gear regulator installed at the factory, is used when an operating shaft must be carried down at a right angle to the damper shaft. It may be used together with a variety of Young regulators, including 301, 315, 896C and flex shaft to operate dampers from the ceiling line. The 1200 is made of heavy-duty steel and die cast construction.

The Young Regulator 5020-1200 commercial quality, balancing damper provides efficient airflow control in conventional air handling systems. It consists of a round damper with a locking worm gear regulator. The damper is constructed of galvanized steel with a 20 ga. blade, synthetic bushings, and a 1/2″round plated steel shaft. The Young 1200 self-locking right angle worm gear regulator installed at the factory, is used when an operating shaft must be carried down at a right angle to the damper shaft. It may be used together with a variety of Young regulators, including 301, 315, 896C and flex shaft to operate dampers from the ceiling line. The 1200 is made of heavy-duty steel and die cast construction.

The Young Regulator 5020-1200 commercial quality, balancing damper provides efficient airflow control in conventional air handling systems. It consists of a round damper with a locking worm gear regulator. The damper is constructed of galvanized steel with a 20 ga. blade, synthetic bushings, and a 1/2″round plated steel shaft. The Young 1200 self-locking right angle worm gear regulator installed at the factory, is used when an operating shaft must be carried down at a right angle to the damper shaft. It may be used together with a variety of Young regulators, including 301, 315, 896C and flex shaft to operate dampers from the ceiling line. The 1200 is made of heavy-duty steel and die cast construction.

The Young Regulator 5020-1200 commercial quality, balancing damper provides efficient airflow control in conventional air handling systems. It consists of a round damper with a locking worm gear regulator. The damper is constructed of galvanized steel with a 20 ga. blade, synthetic bushings, and a 1/2″round plated steel shaft. The Young 1200 self-locking right angle worm gear regulator installed at the factory, is used when an operating shaft must be carried down at a right angle to the damper shaft. It may be used together with a variety of Young regulators, including 301, 315, 896C and flex shaft to operate dampers from the ceiling line. The 1200 is made of heavy-duty steel and die cast construction.

The Young Regulator 5020-1200 commercial quality, balancing damper provides efficient airflow control in conventional air handling systems. It consists of a round damper with a locking worm gear regulator. The damper is constructed of galvanized steel with a 20 ga. blade, synthetic bushings, and a 1/2″round plated steel shaft. The Young 1200 self-locking right angle worm gear regulator installed at the factory, is used when an operating shaft must be carried down at a right angle to the damper shaft. It may be used together with a variety of Young regulators, including 301, 315, 896C and flex shaft to operate dampers from the ceiling line. The 1200 is made of heavy-duty steel and die cast construction.

YOUNG 12" SOCKET WRENCH

Concealed Chrome Cover Plate 3"