Shopping cart

Filters

Personal menu

Preferences

Picture of Axial Roof Exhaust Fan, Model AE-12, Direct Drive, 1/6HP, 115V, 1Ph, 144-1014 CFM

Manufacturer: Greenheck

Axial Roof Exhaust Fan, Model AE-12, Direct Drive, 1/6HP, 115V, 1Ph, 144-1014 CFM

$902.00

Model AE, direct drive axial exhaust fan is designed for economy and reliability in low pressure/low volume applications. Typical applications include general clean air ventilation.

22 x 22 inch base with prepunched mounting holes for easy attachment to roof curb
12 inch fabricated aluminum propeller designed for low sound levels
14.5 x 14.5 inch recommended roof opening

SKU: AE-12-433-B6X-QD

Ships From: Greenheck

Qty:

View Related Products

Available In: 5-7 Business Days

Product Specifications
Performance
Dimensional Drawing
Literature
Certifications

Motor HP	Max BHP	Max Fan RPM	Min Fan RPM	Ps (in. wg)	0	0.125	0.25	0.375
1/6	0.05	1140	-	CFM	1014	803	376	144
Sones	5.1	5.1	7.4	8.6
Bhp	0.03	0.037	0.044	0.052

Dimension
A	22 in
B	28.625 in
C	16.5 in
D	6.25 in

Dimensions
Base/Panel Length X Width Square base dimension on power roof ventilators. Square fan panel dimension on sidewall propeller fans.	22 x 22 in
Curb Cap Size Square base dimension on power roof ventilators.Tells you what size roof curb is needed.	22 in
Impeller Diameter Dimension of the impeller (propeller or wheel) in inches.	12 in
Roof Opening Width x Roof Opening Length Describes the size (width x lenght) of the roof opening that is required in order to properly install a given fan or ventilator.	14 1/2 x 14 1/2 in
Base Height Height of the curb cap on power roof ventilators.	1 3/4 in
Base Top To Shroud Distance between the top of the curb cap to where the shroud begins on downblast power roof ventilators.	6 1/4 in
Base Top to Shroud Top Dimension from the top of the base to the top of the shroud on a downblast exhaust ventilator.	16 1/2 in
Damper Width x Damper Height The "ACTUAL" damper width and height. Dampers are undersized to allow them to be mounted into the duct work/wall opening.	12 x 12 in
Height The height of a given product.	16 1/2 in
Weight Weight	41 lbs
Overall Diameter Describes the diameter at the widest point for a given product.	28 5/8 in

Performance
CFM Range CFM Range	144-1014
FRPM Range FRPM Range	1400-1140

Application
Application Applications/uses for a particular fan or ventilator.	Exhaust General and Clean Air
Mounting Location Refers to the location where a fan or ventilator can be mounted.	Roof

Construction Features
Drive Type Transmission type of the ventilator (belt drive or direct drive).	Direct Drive
Impeller Type Style of impeller that is utilized on a product (i.e. Centrifugal or Axial).	Propeller
Impeller Material Type of material the impeller of a fan or ventilator is constructed of.	Aluminum
Housing Material Type of material the housing of a ventilator is constructed of.	Spun Aluminum
Includes Describes items that a particular product includes such as mounting hardware, etc.	Birdscreen
Max Inlet Temp The maximum entering air temperature that a fan or ventilator can withstand while in operation, without compromising the life of the unit.	130 °F
Certifications Certifications	AMCA Sound & Air UL/cUL 705 AMCA Sound & Air UL/cUL 705
Speed Controllable Describes whether a fan or ventilator can be used with a solid state speed control. (NOTE: A speed control cannot be used with any belt-drive fan or ventilator.)	Yes
Required Accessory Describes what accessory(s) must be purchased in addition to make the product fully functional.	Roof Curb

Motor Information
Service Factor A safety factor to be used when the load temporarily exceeds the nominal horse power rating of a given motor. When used on a motor nameplate, a number which indicates how much above the nameplate rating a motor can be loaded without causing serious degrad	1
Phase Indicates the space relationships of windings and changing values of the recurring cycles of AC voltages and currents. The most common power supplies are either single- or three-phase.	1
Voltage The force that causes a current to flow in an electrical circuit. The voltage of a motor is usually determined by the supply to which it is attached. NEMA requires that motor be able to carry its rated horsepower at nameplate voltage plus or minus 1% al	115
HP The power required to drive an air moving device. Horsepower required varies with system conditions.	1/6
Hertz Measure of the frequency or cycles per second.	60
Motor Enclosure The housing or frame of the motor.	Open Drip Proof
RPM The number of times per minute the shaft of the motor (machine) rotates. This is a function of design and the power supply.	1200
Motor Insulation The class of motor insulation for a given motor. The temperature capabilities of each insulation class is defined as being the maximum temperature at which the insulation can be operated to yield an average life of 2, hours (A = 15?C, B = 135?C, F =	B
Thermal Protection This is a feature which protects the motor from overheating and thus prolongs service life of the machine. In the event that the motor approaches overheating the thermal protection cuts power and only returns it after a cooling period.	AutoOverload
Nominal Efficiency Nominal Efficiency	61.8
NEMA Frame Size Refers to a set of physical dimensions of motors as established by NEMA (National Electrical Manufacturers Association). These dimensions include critical mounting dimensions.	48

General
Unit of Measure Unit of Measure	ea
Warranty Length Warranty Length	1 Year

Model AE, direct drive axial exhaust fan is designed for economy and reliability in low pressure/low volume applications. The robust design maximizes performance while maintaining low sounds levels. Typical applications include general clean air ventilation in educational facilities, office buildings, manufacturing, hospitals and apartment complexes.

Aluminum motor cover attached with stainless steel hardware for easy removal and access to motor
One-piece, heavy gauge aluminum fan shroud with rolled bead for added strength
Speed controllable, with up to 30% turndown
Permanent stamped aluminum plate for exact model and serial number identification
Vibration isolators support the motor and propeller for long life and quiet operation
Includes a large internal conduit chase for installing electrical wiring through the curb cap into the motor compartment

Products specifications

Unit of Measure	ea
Service Factor	1
Application	Exhaust General and Clean Air
Mounting Location	Roof
Base/Panel Length X Width	22 x 22 in
Drive Type	Direct Drive
Phase	1
Voltage	115
HP	1/6
Impeller Type	Propeller
Impeller Material	Aluminum
Housing Material	Spun Aluminum
Includes	Birdscreen
Max Inlet Temp
Certifications	AMCA Sound & Air, UL/cUL 705
Warranty Length	1 Year
Speed Controllable	Yes
Required Accessory	Roof Curb
Curb Cap Size
Impeller Diameter
Roof Opening Width x Roof Opening Length
Base Height
Base Top To Shroud
Base Top to Shroud Top
Damper Width x Damper Height	12 x 12 in
Height
Weight
Overall Diameter
Hertz
Motor Enclosure	Open Drip Proof
RPM
Motor Insulation	B
Thermal Protection	AutoOverload
Nominal Efficiency
NEMA Frame Size	48
CFM Range	144-1014
FRPM Range	1400-1140

Customers who bought this item also bought

Roof Curb for 22 In. Square Base, 18 In. High

GPI-22-G18

$346.00

GPI roof curbs are designed for flat, insulated or non-insulated roof decks. Constructed of 18 gauge galvanized steel and fully formed on three sides with a single, fully welded seam.

Designed to fit 22" roof curb cap
2-inch mounting flange
Rigid, fiberglass insulation
Welded, straight-sided construction

Backdraft damper, vertical mount, Model BD-320, 16 In Sq, Flange on Discharge, Performance up to 1,500 ft/min

BD320-16X16

$170.00

The BD-320 is a vertical mount backdraft damper designed to allow horizontal airflow and prevent reverse airflow. The dampers are opened by air pressure differential and closed by gravity. The damper features a galvanized steel frame with a flange on the discharge side and aluminum blades.

Complies with the International Energy Conservation Code (IECC) and ASHRAE 90.1 leakage requirements for non-motorized dampers
AMCA certified for Air Leakage and Air Performance
Width and height furnished approximately 0.125 in. under size

Motor HP	Horsepower. Used to indicate a fan's motor size.
Max BHP	Brake Horsepower. A measure of power consumption. Used to determine the proper motor horsepower and wiring.
Max Fan RPM	Revolutions Per Minute. Measure of maximum fan speed.
Min Fan RPM	Revolutions Per Minute. Measure of minimum fan speed.
Ps	Static Pressure. Resistance to airflow measured in inches of water gauge.
CFM	Cubic Feet Per Minute. A measure of airflow.
Sones	A measure of loudness. One sone can be approximated as the loudness of a quiet refrigerator at a distance of 5 feet. Sones follow a linear scale, that is, 10 sones are twice as loud as 5 sones.